Hobart AirForce 400 Plasma Cutter
27 AMP, Model# 500474
Cuts up to 3/8 in. mild steel, 1/4 in. aluminum and 5/16 in. stainless steel.
25 Amp rated output with 34 Amps of 115 Volt or 17 Amps of 230 Volt AC input power at 35% duty cycle.
Controlled pilot arc eliminates retriggering of gun.
4.5 CFM plasma gas flow at 60 PSI. With 15-foot torch cable and work lead, power cord and extra consumables.
Allow 2 Week Delivery
* ICE-27C hand-held torch with 20ft. cable and consumables
* 15ft. heavy-duty clamp
* 10ft. power cord with 115 VAC, 20 A plug
* Built-in gas/air filter and regulator for extra protection
* Pilot Arc Controller increases cutting capabilities and speeds, and improves tip life
* ICE-27C torch with safety trigger, improved swirl ring and cup
* LVC™ line voltage compensation
* Power factor correction
* LED indicators for pressure, power and cup
* Starts without high frequency
* Convenient consumables storage compartment
* Provides full cutting capacity when powered by most engine-driven welders with 240 VAC receptacles
* Postflow cooling circuit extends consumable life
* Overall size: 17in. H x 18in. W x 6 3/4in. D
* Model 500474
* 15ft. heavy-duty clamp
* 10ft. power cord with 115 VAC, 20 A plug
* Built-in gas/air filter and regulator for extra protection
* Pilot Arc Controller increases cutting capabilities and speeds, and improves tip life
* ICE-27C torch with safety trigger, improved swirl ring and cup
* LVC™ line voltage compensation
* Power factor correction
* LED indicators for pressure, power and cup
* Starts without high frequency
* Convenient consumables storage compartment
* Provides full cutting capacity when powered by most engine-driven welders with 240 VAC receptacles
* Postflow cooling circuit extends consumable life
* Overall size: 17in. H x 18in. W x 6 3/4in. D
* Model 500474
